The debugging pim all command enables all debugging functions of the PIM protocol.
The undo debugging pim all command disables all debugging functions of the PIM protocol.
By default, all debugging functions of the PIM protocol are disabled.
| Parameter | Description | Value |
|---|---|---|
| vpn-instance vpn-instance-name |
Specifies the name of a VPN instance. |
The value is a string of 1 to 31 case-sensitive characters, spaces not supported. In addition, the VPN instance name must not be _public_. When double quotation marks are used around the string, spaces are allowed in the string. |
| all-instance |
Specifies all instances. |
- |
Usage Scenario
The debugging pim all command displays the creation of an entire PIM network and outputs information such as creation of a PIM neighbor, transfer of RP information, RP election, multicast source registration, creation of a multicast distribution tree, assert election mechanism, state refresh, PIM BFD, PIM routing table, interworking between PIM and MSDP and events.
Precautions
If debugging of all instances is enabled, debugging of new instances is enabled automatically.