debugging route-policy

Function

The debugging route-policy command enables debugging of the routing policy. After debugging of the routing policy is enabled, the debugging information about the routing policy is output on the screen.

The undo debugging route-policy command disables debugging of the routing policy.

By default, the debugging of routing policy is disabled.

Format

debugging route-policy

undo debugging route-policy

Parameters

None

Views

User view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
route-base	debug

Usage Guidelines

Usage Scenario

The debugging route-policy command enables debugging of the routing policy so that you can view the internal processes of the routing policy. The process information is output on the screen.

Prerequisites

Global terminal debugging has been enabled.

Example

# Enable debugging of the routing policy.

<HUAWEI> debugging route-policy
<HUAWEI> terminal debugging
Info: Current terminal debugging is on.
<HUAWEI>
2011-08-27 08:02:48 HUAWEI %%01RTP/7/DEBUG_RTP_ALL(d):CID=2154899269;
RTP: rtp_api.c, 1588, Start to create config, filter type(0), index(4)
2011-08-27 08:02:48 HUAWEI %%01RTP/7/DEBUG_RTP_ALL(d):CID=2154899269;
RTP: rtp_api.c, 1241, Increase filter reference Count, the input index=4, filter Type=0.
2011-08-27 08:02:48 HUAWEI %%01RTP/7/DEBUG_RTP_ALL(d):CID=2154899269;
RTP: rtp_rp.c, 385, Create a new Route-policy (4)
2011-08-27 08:02:48 HUAWEI %%01RTP/7/DEBUG_RTP_ALL(d):CID=2154899269;
RTP: rtp_rp.c, 2415, Increase route policy reference Count. name(), index(4), current count(1)
2011-08-27 08:02:48 HUAWEI %%01RTP/7/DEBUG_RTP_ALL(d):CID=2154899269;
RTP: rtp_cfg_restore.c, 150, restore class = 0x938a21a, uiDBId = 0, usTblId = 538