debugging gne

Function

The debugging gne command enables the debugging functions of a GNE.

The undo debugging gne command disables the debugging functions of a GNE.

By default, the debugging functions are disabled.

Format

debugging gne { all | packet | event | error | process }

undo debugging gne { all | packet | event | error | process }

Parameters

Parameter	Description	Value
all	Specifies whether to enable or disable all the debugging functions of a GNE.	-
packet	Specifies whether to enable or disable the packet debugging function of a GNE.	-
event	Specifies whether to enable or disable the event debugging function of a GNE.	-
error	Specifies whether to enable or disable the error debugging function of a GNE.	-
process	Specifies whether to enable or disable the process debugging function of a GNE.	-

Views

User view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
dcn	debug

Usage Guidelines

Usage Scenario

If the communication between the NE and NMS fails, for example, the DCN function fails to be automatically enabled on the device or a specified interface, a configuration error occurs, the DCN function is disabled using the PAF, or the device does not have any NEID, run the debugging gne command to enable the debugging functions of the GNE for problem locating.

This command is supported only on the admin VS.

Example

# Enable all the debugging functions of a GNE.

<HUAWEI> debugging gne all