debugging hwtacacs

Function

The debugging hwtacacs command can enable the system debugging function of HWTACACS.

The undo debugging hwtacacs command can disable the system debugging function of HWTACACS.

By default, the debugging of HWTACACS is disabled.

Format

debugging hwtacacs { all | error | event | message | receive-packet | send-packet }

undo debugging hwtacacs { all | error | event | message | receive-packet | send-packet }

Parameters

Parameter	Description	Value
all	Enables or disables debugging of all current modules.	-
error	Indicates debugging of error function.	-
event	Indicates debugging of event function.	-
message	Indicates debugging of message function.	-
receive-packet	Indicates debugging of received packet function.	-
send-packet	Indicates debugging of sent packet function.	-

Views

User view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
hwtacacs	debug

Usage Guidelines

When a HWTACACS module becomes faulty, the network administrator cannot use HWTACACS to get AAA services (Authentication, Authorization and Accounting) on the remote device. You can run this command to start the debugging information on the HWTACACS module and rapidly locate faults based on the obtained information.

Example

# Enable HWTACACS debugging information on a console.

<HUAWEI> debugging hwtacacs all