The debugging isis bfd command enables debugging of IS-IS BFD.
The undo debugging isis bfd command disables debugging of IS-IS BFD.
By default, debugging of IS-IS BFD is disabled.
debugging isis bfd process-id
undo debugging isis bfd process-id
Specifies the ID of an IS-IS process.
The value is an integer ranging from 1 to 4294967295.
User view
3: Management level
Usage Scenario
The debugging isis bfd command enables debugging of IS-IS BFD so that you can detect changes of link status.
<HUAWEI> debugging isis bfd 1 2011-02-25 01:41:07 HUAWEI %%01isiscomm/7/DIS_CHG_DISABLE_ADJ_BFD(d):CID=2156472153;ISIS-1-BFD: Circuit DIS change, disable adj bfd. (IfName=GigabitEthernet0/1/0, Level=2) 2011-02-25 01:41:07 HUAWEI %%01isiscomm/7/DIS_CHG_ENABLE_ADJ_BFD(d):CID=2156472153;ISIS-1-BFD: Circuit DIS change, enable adj bfd. (IfName=GigabitEthernet0/1/0, Level=2) 2011-02-25 01:41:07 HUAWEI %%01isiscomm/7/ENABLE_IPV4_ADJ_BFD(d):CID=2156472153;ISIS-1-BFD: Enable IPv4 adj bfd session. (IfName=GigabitEthernet0/1/0, AdjSysId=2222.2222.2222, DestIpAddr=192.168.1.2, Level=2)
Interface name.
IS-IS level.
Adjacent system ID.
Destination IP address.