debugging isis self-originate-update

Function

The debugging isis self-originate-update command enables debugging of IS-IS self-originate-update.

The undo debugging isis self-originate-update command disables debugging of IS-IS self-originate-update.

By default, debugging of IS-IS self-originate-update is disabled.

Format

debugging isis self-originate-update process-id

undo debugging isis self-originate-update process-id

Parameters

Parameter	Description	Value
process-id	Specifies the ID of an IS-IS process.	The value is an integer ranging from 1 to 4294967295.

Parameter

Description

Value

process-id

Specifies the ID of an IS-IS process.

The value is an integer ranging from 1 to 4294967295.

Views

User view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
isis	debug

Usage Guidelines

Usage Scenario

The debugging isis self-originate-update command enables debugging of IS-IS self-originate-update so that you can view the information about IS-IS LSP update.

Example

# Enable debugging of IS-IS self-originate-update.

<HUAWEI> debugging isis self-originate-update 1
2011-02-25 01:41:07 HUAWEI %%01isiscomm/7/SELF_LSP_ADD_IP(d):CID=2156472153;ISIS-1-UPDT: Add IP address into LSP. (TlvType=128, Level=1, IPAddr=10.0.0.0)
2011-02-25 01:41:07 HUAWEI %%01isiscomm/7/RECV_CIRC_CHANGE(d):CID=2156472153;ISIS-1-UPDT: Rxed Ckt Down. (IfName=)
2011-02-25 01:41:07 HUAWEI %%01isiscomm/7/SELF_LSP_TIMER_EXPIRE(d):CID=2156472153;ISIS-1-UPDT: Lsp generation Intelligent timer expired. (Level=1)

**Table 1** Description of the **debugging isis self-originate-update** command output
Item	Description
IfName	Interface name.
Level	IS-IS level.
TlvType	TLV type.
IPAddr	Destination IP address.