debugging isis snp-packet

Function

The debugging isis snp-packet command enables debugging of IS-IS SNP packets.

The undo debugging isis snp-packet command disables debugging of IS-IS SNP packets.

By default, debugging of IS-IS SNP packets is disabled.

Format

debugging isis snp-packet process-id [ interface { interfacename | interfacetype interfacenum } ]

undo debugging isis snp-packet process-id [ interface { interfacename | interfacetype interfacenum } ]

Parameters

Parameter	Description	Value
process-id	Specifies the ID of an IS-IS process.	The value is an integer ranging from 1 to 4294967295.
interface interfacename	Specifies the name of the interface from which packets are received.	-
interfacetype	Specifies the type the interface from which packets are received.	-
interfacenum	Specifies the number of the interface from which packets are received.	-

Views

User view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
isis	debug

Usage Guidelines

Usage Scenario

The debugging isis snp-packet command enables debugging of IS-IS SNP packets so that you can view sending, receiving, and processing of CSNP and PSNP packets.

Example

# Enable debugging of IS-IS SNP packets.

<HUAWEI> debugging isis snp-packet
2011-02-24 12:13:54 HUAWEI %%01isiscomm/6/SEND_SNP_OK(d):CID=2156275618;ISIS-1-SNP: Succeed to send CSNP on circuit. (IfName=GigabitEthernet0/1/0, Level=1)

**Table 1** Description of the **debugging isis snp-packet** command output
Item	Description
IfName	Interface name.
Level	Interface level.