The debugging isis update-process command enables debugging of the IS-IS update process.
The undo debugging isis update-process command disables debugging of the IS-IS update process.
By default, debugging of the IS-IS update process is disabled.
| Parameter | Description | Value |
|---|---|---|
| process-id |
Specifies the ID of an IS-IS process. |
The value is an integer ranging from 1 to 4294967295. No default value is provided. |
| policy |
Specifies the route policy. The command enables the debugging function for routes which pass the policy. |
- |
| ip-prefix prefix-name |
Specifies the name of the IPv4 prefix list. |
The name is a string of 1 to 169 case-sensitive characters, with spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string. |
| ipv6-prefix prefix-name |
Specifies the name of the IPv6 prefix list. |
The name is a string of 1 to 169 case-sensitive characters, with spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string. |
| ipv4-acl acl-number |
Specifies the IPv4 basic ACL. |
The value is an integer ranging from 2000 to 2999. |
| ipv6-acl acl-number |
Specifies the IPv6 basic ACL. |
The value is an integer ranging from 2000 to 2999. |
<HUAWEI> debugging isis update-process 2011-02-25 00:30:36 HUAWEI %%01isiscomm/7/RECV_CIRC_CHANGE(d):CID=2156275547;IS-IS-1-UPDT: Receive circ change. (IfName=GigabitEthernet0/1/0, ChangeType=Circ up)
| Item | Description |
|---|---|
| IfName | Interface name. |
| ChangeType | Change type of an interface. |