debugging ntp-service

Function

The debugging ntp-service command enables NTP debugging.

The undo debugging ntp-service command disables NTP debugging.

By default, NTP debugging is disabled.

Format

debugging ntp-service { access | adjustment | authentication | event | filter | packet [ ipv6 ] [ send | receive ] | parameter | refclock | selection | synchronization | validity | rate | all }

undo debugging ntp-service { access | adjustment | authentication | event | filter | packet [ ipv6 ] [ send | receive ] | parameter | refclock | selection | synchronization | validity | rate | all }

Parameters

Parameter	Description	Value
access	Enables debugging of access control.	-
adjustment	Enables debugging of clock adjustment.	-
authentication	Enables authentication debugging.	-
event	Enables event debugging.	-
filter	Enables debugging of loopback filter information.	-
packet	Enables the packet debugging.	-
ipv6	Enables debugging of IPv6 NTP.	-
send	Enables sent packet debugging.	-
receive	Enables receive packet debugging.	-
parameter	Enables debugging of clock parameters.	-
refclock	Enables debugging of reference clocks.	-
selection	Enables debugging of clock selection information.	-
synchronization	Enables debugging of clock synchronization information.	-
validity	Enables debugging of validity of the remote host.	-
rate	Rate adjustment debugging functions.	-
all	Enables all debugging functions.	-

Views

User view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
ntp	debug

Usage Guidelines

This command displays all types of NTP debugging information, or the specified type of NTP debugging information when you configure a key word so that you can determine whether the currently received and sent packets are correct.

Example

# Enable debugging of NTP authentication.

<HUAWEI> debugging ntp-service authentication