The debugging sr-te-policy command is used to enable the debugging of the SR-MPLS TE Policy.
The undo debugging sr-te-policy command is used to disable the debugging of the SR-MPLS TE Policy.
By default, the debugging of the SR-MPLS TE Policy is disabled.
debugging sr-te-policy { policy | policy-group | tnlm | bgp | bfd | dgntl | common | bgp-ls } { cfg-event | producer-event | core-event | db-event | fes-event | ha-event | error-event | all }
debugging sr-te-policy tnlm filter tunnel-id
debugging sr-te-policy policy-group filter group-id
debugging sr-te-policy { policy | bgp | bgp-ls } filter endpoint ipv4-address color color-value
debugging sr-te-policy bfd filter list-id
undo debugging sr-te-policy { policy | policy-group | tnlm | bgp | bfd | dgntl | common | bgp-ls } { cfg-event | producer-event | core-event | db-event | fes-event | ha-event | error-event | all }
undo debugging sr-te-policy policy-group filter [ group-id ]
undo debugging sr-te-policy tnlm filter [ tunnel-id ]
undo debugging sr-te-policy bfd filter [ list-id ]
undo debugging sr-te-policy { policy | bgp | bgp-ls } filter endpoint ipv4-address color color-value
| Parameter | Description | Value |
|---|---|---|
| policy-group |
Indicates an SR-MPLS TE Policy group change event. |
- |
| tnlm |
Indicates an SR-MPLS TE Policy TNLM change event. |
- |
| bgp |
Indicates an SR-MPLS TE Policy BGP change event. |
- |
| bfd |
Indicates an SR-MPLS TE policy BFD change event. |
- |
| dgntl |
Indicates an SR-MPLS TE Policy DGNTL change event. |
- |
| common |
Indicates an SR-MPLS TE Policy common change event. |
- |
| bgp-ls |
Indicates a BGP-LS change event. |
- |
| cfg-event |
Indicates an SR-MPLS TE Policy configuration and message event. |
- |
| producer-event |
Indicates an SR-MPLS TE Policy producer change event. |
- |
| core-event |
Indicates an SR-MPLS TE Policy core change event. |
- |
| db-event |
Indicates an SR-MPLS TE Policy DB change event. |
- |
| fes-event |
Indicates an SR-MPLS TE Policy FES change event. |
- |
| ha-event |
Indicates an SR-MPLS TE Policy active/standby change event. |
- |
| error-event |
Indicates an SR-MPLS TE Policy error event. |
- |
| all |
Indicates whether to enable the change event function. |
- |
| filter |
Indicates debugging filter criteria. |
- |
| tunnel-id |
Specifies the tunnel ID of an SR-MPLS TE Policy. |
The value is an integer ranging from 1 to 4294967295. |
| group-id |
Specifies the ID of an SR-MPLS TE Policy group. |
The value is an integer ranging from 1 to 4294967295. |
| endpoint ipv4-address |
Specifies the endpoint of an SR-MPLS TE Policy. |
The value is in dotted decimal notation. |
| color color-value |
Specifies the color of an SR-MPLS TE Policy. |
The value is an integer ranging from 0 to 4294967295. |
| list-id |
Specifies the segment list ID of an SR-MPLS TE Policy. |
The value is an integer ranging from 1 to 4294967295. |
<HUAWEI> debugging sr-te-policy filter endpoint 2.2.2.2 color 100
<HUAWEI> debugging sr-te-policy all
<HUAWEI> debugging sr-te-policy bgp-ls core-event