debugging ip userlog

Function

The debugging ip userlog command enables the debugging of user login and logout logs.

The undo debugging ip userlog command restores the default configuration.

By default, the function is disabled.

This command is supported only on the NetEngine 8000 F1A.

Format

debugging ip userlog { access | packet | error | all }

undo debugging ip userlog { access | packet | error | all }

Parameters

Parameter	Description	Value
access	Enables the debugging of user login and logout logs.	-
packet	Enables the debugging of packets used to send user login and logout logs.	-
error	Enables the debugging of errors for user login and logout logs.	-
all	Enables all debugging functions for user login and logout logs.	-

Views

User view

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
bras-control	debug

Usage Guidelines

Usage Scenario

To enable the debugging of user login and logout logs, run the debugging ip userlog command. The function allows you to check user login and logout logs, which include user names, MAC addresses, IP addresses, and login and logout time. You can also check error user information.

Configuration Impact

The debugging command affects the system performance. Disable the debugging function after you complete troubleshooting.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Enable the debugging of errors for user login and logout logs.

<HUAWEI> debugging ip userlog all