debugging alarm

Function

The debugging alarm command enables the debugging of the alarm management module.

The undo debugging alarm command disables the debugging of the alarm management module.

By default, the debugging of the alarm management module is disabled.

Format

debugging alarm { trace | error | fsm | corre | all | reverse }

undo debugging alarm { trace | error | fsm | corre | all | reverse }

Parameters

Parameter	Description	Value
trace	Enables the debugging of procedures during the running of the alarm management module.	-
error	Enables the debugging of errors generated during the running of the alarm management module.	-
fsm	Enables the debugging of the alarm state machine.	-
corre	Corre debugging switch.	-
all	Enables the debugging of all functions of the alarm management module.	-
reverse	Enables the debugging of alarm inversion.	-

Views

User view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
fault-mgr	debug

Usage Guidelines

Usage Scenario

If you want to enable the debugging of the alarm management module or check the required debugging information by specifying parameters to help locate faults, run the debugging alarm command.

Precautions

This command is supported only on the admin VS.

Example

# Enable the debugging of alarm correlation.

<HUAWEI> debugging alarm corre