debugging twamp

Function

The debugging twamp command enables debugging for TWAMP.

The undo debugging twamp command disables debugging for TWAMP.

By default, NetStream debugging is disabled.

Format

debugging twamp { error | process } [ client-ip set-client-ip client-port set-client-port [ vpn-instance vpn-instance-name ] ]

undo debugging twamp

Parameters

Parameter	Description	Value
error	Enables the TWAMP error debugging.	-
process	Enables the TWAMP process debugging.	-
client-ip set-client-ip	Specifies the IP address of the Client.	The value is in dotted decimal notation.
client-port set-client-port	Specifies the port of the Client.	The value is an integer ranging from 1 to 65535.
vpn-instance vpn-instance-name	Specifies a VPN instance.	The value is a string of 1 to 31 case-sensitive characters, spaces not supported. In addition, the VPN instance name must not be _public_. When double quotation marks are used around the string, spaces are allowed in the string.

Views

User view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
twamp	debug

Usage Guidelines

Usage Scenario

To debug the entire TWAMP process, you can run the debugging twamp process command to enable TWAMP debugging.

Example

# Configure the TWAMP error debugging for the control-client with an IP address 1.1.1.1.

<HUAWEI> debugging twamp error client-ip 1.1.1.1 client-port 862