The debugging smart-link flush command enables the debugging of Flush packets.
The undo debugging smart-link flush command disables the debugging of Flush packets.
By default, the flush packets debugging is disable.
debugging smart-link flush [ all | receive | send ]
undo debugging smart-link flush [ all | receive | send ]
Indicates the debugging of all Flush packets.
-
Indicates the debugging of the reception of Flush packets.
Indicates the debugging of the transmission of Flush packets.
User view
3: Management level
Usage Scenario
To enable the flush packet debugging function, run the debugging smart-link flush command. This helps locate faults and maintain the device.
<HUAWEI> debugging smart-link flush