Installing cabinet doors

Install the cabinet door after the inside components and cables. To install the components inside the cabinets and cables, see the Installaiton Guide.

  1. Installing the cabinet doors.
    1. Align the door with the front face of the column.
    2. Place the door on the lower lintel and close the door till the lower pin automatically inserts into the hole in the lower lintel.
    3. Press the spring pin with your finger and push the upper part of the door till the spring pin properly inserts in the installation hole at the top of the lintel.
    4. Check the spring pin and lower pins and ensure that the door is properly installed.
    5. To install the rear door, see the front door installation.
      Figure 1 Installing the cabinet doors
  2. Install the ground cables at the front doors and rear doors as shown in the figure.
    Figure 2 Installing the ground cables
Parent Topic: Installing the Cabinet on the Concrete Floor
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic