Determining the Installation Position of the Supports

Positioning the cabinet.
Figure 1 Positioning the cabinet

The spacing between the rear door of the front access cabinet and the wall or any other obstacles should be no less than 100 mm.
Determining installation holes for the cabinet.
1. Lay out the templates side by side and ensure that there is 600 mm between the center lines of two adjacent templates.
2. Use a marker to mark installation holes on the concrete floor.
  Figure 2 Determining installation holes for the cabinet
  
  Position the template so that the semicircular gap indicates the front of the cabinet.
  
  After marking the reference lines, check the hole positions with a ruler.