Installing the Cabinet

Placing the cabinet.
1. Place the cabinet on the guide rails, and align the installation holes of the cabinet with the holes of the guide rails.
2. Fit the spring washer, flat washer and insulation tube on the four M12x35 bolts. Insert them into the installation holes and tighten the bolts a bit, but do not fasten them.
3. Lift one side of the cabinet and insert the insulation plate under the cabinet. Insert another insulation plate under the other side of the cabinet. Ensure that the gaps properly lock the expansion bolts.
  Figure 1 Placing the cabinet
Leveling and fixing the cabinet.
1. Remove the four adjusting bolts attached on the bottom enclosure frame, install them on the adjusting nuts.
2. Check whether the cabinet is horizontal or vertical by using a spirit level and a plumb line respectively.
3. If the cabinet is not horizontal,use a socket wrench to screw the adjusting bolts at the bottom.
4. Lift one side of the cabinet and insert when the cabinet is horizontal, screw the four M12x35 bolts to 45 N·m with a torque wrench.
  Figure 2 Leveling and fixing the cabinet