Preparing Installation Tools and Accessories

ESD gloves

Used to prevent electrostatic discharges.

Protective gloves

Used to protect hands during operation.

ESD wrist strap

Used to prevent electrostatic discharges. Wear the strap on your wrist and insert the other end into the ESD jack on the cabinet.

Utility knife

Used to cut cartons or paper.

Scissors

Used to cut the installation template or other materials.

Tweezers

Used to unplug Ethernet cables and optical fibers.

Measuring tape

Used to measure distances.

Marker

Used to mark component installation positions.

Flat-head screwdriver

Used to turn slotted-head screws and bolts.

Phillips screwdriver

Used to turn cross-head screws and bolts.

Combination pliers

Used to clamp or bend metal sheets, cut metal wires, strip off coating of cables, and unplug nails.

Diagonal pliers

Used to cut insulation tubes and cable ties.

Wire stripper

Used to strip off the insulation coating and shields of communication cables with small cross-sectional areas.

RJ45 crimping tool

Used to crimp Ethernet cables.

COAX crimping tool

Used to crimp the metal shield at the end of a coaxial cable.

Ethernet cable tester

Used to test Ethernet cable connectivity.

Multimeter

Used to test cabinet insulation, cable connectivity, and device electrical performance indicators, including voltage, current, and resistance.

Adjustable wrench

Used to tighten or loosen hex or square bolts and nuts. The span can be adjusted to suit bolts or nuts in different sizes.

Insulation tape

Used to insulate power wires or other conductors.

Corrugated pipe

Used to protect optical fibers.

Serial cable

1

Used to connect the console port of the device to a serial port of a maintenance terminal for local commissioning or maintenance of the device.

04040838

Panel screw (M6x12)

8

Used to fix expandable guide rails and the device.

26020141

Floating nut (M6)

8

Installed on mounting rails of a cabinet or rack and used with M6 screws to secure the expandable guide rails and the device in the cabinet or rack.

26020075

ESD wrist strap

1

Prevents ESD damages when you touch or operate the equipment or components.

28050001

Fiber binding tape

1 m

Used to bundle optical fibers.

21101258

Cable tie (300 x 3.6 mm)

50

Used to bundle cables.

21100144

Label cable tie

12

Used to bundle cables and attach the power cable label (29041061) to the cables.

21200708

Signal cable label

1

Used to identify locations of signal cables.

29041060

Power cable label

1

Used to identify locations of power cables.

29041061