Installing a Single Cabinet Stand (for Installation of One Cabinet)

Procedure

1. Align mounting holes on the cabinet stand with four expansion bolt mounting holes on the floor, and install expansion bolts. See callout 1 in Figure 1.
2. Use a level check whether the stand is level. See callout 2 in Figure 1.
3. If the stand leans, place spacers below the stand. See callout 3 in Figure 1.
4. Use a torque socket to fasten the four expansion bolts with a torque of 45 N m. See callout 4 in Figure 1.
   Figure 1 Installing a single cabinet stand