Precautions for Using Engineering Labels

When using labels, pay attention to the following points:

• When printing, writing, or attaching labels, keep the labels clean.
• Since the label paper is made of moistureproof material, ink-jet printers and ink pens cannot be used to print and write labels.
• Labels should be attached neatly. New-type labels are L-shaped. If they are pasted at incorrect locations or in the incorrect direction, the appearance of the device is affected.
• Power cable ties should be attached in the same positions on power cables, with identification plates on the same side.
• The positions of "up", "down", "left" or "right" are all based on the viewpoint of the engineering person who is working on the label.