TUNNEL-TE/4/hwMplsApsMismatchRecovery

Message

TUNNEL-TE/4/hwMplsApsMismatchRecovery: Working or protection configuration mismatch recovery are detected by APS frame. (IfIndex=[WorkTunnelIfIndex], WorkTunnel=[WorkTunnel], MismatchReason=[MismatchReason])

Description

APS information on the local end of a bidirectional tunnel was inconsistent with that on the remote end has been recovered.

Parameters

Parameter Name	Parameter Meaning
WorkTunnelIfIndex	Index of a primary tunnel interface
WorkTunnel	Name of a primary tunnel
MismatchReason	Cause of a configuration inconsistency: 2: A tunnel protection group is configured only on one end. 4: The revertive mode is configured on one end, and the non-revertive mode is configured on the other end. 5: The sent requested signal does not match the received one. 6: APS packets are received from the working path.

Possible Causes

APS information on the local end of a bidirectional tunnel was inconsistent with that on the remote end has been recovered.

Procedure

This alarm message is informational only, and no action is required.