OSPF/6/BAD_LSA

Message

OSPF/6/BAD_LSA: OSPF Received bad LSA. (ErrorType=[ErrType], ErrorInformation=[ErrInfo], ProcessId=[ProcessId], InterfaceName=[IfName], LsaType=[LsaType], AdvertisingRouter=[AdvRtr], LinkStateId=[LSID], Count=[Counter], AreaId=[AreaId])

Description

The first incorrect LSA was received within 15 minutes. Each packet error type has a specific suppression measure, and suppression measures do not affect each other.

Parameters

Parameter Name	Parameter Meaning
ErrType	Packet error type
ErrInfo	Key packet error information
ProcessId	Process ID
IfName	Interface name
LsaType	LSA type
AdvRtr	LSA advertising device.
LSID	Link state ID
Counter	Number of error packets (The number is reset after being displayed. This means that the number of incorrect packets displayed in the log only indicates the number of incorrect packets generated since the last time the number of incorrect packets was displayed.)
AreaId	Area ID

Possible Causes

This log is displayed if the router receives an incorrect LSA (for example, the checksum of the LSA is incorrect). Incorrect LSAs of the same type are suppressed for 15 minutes.

Procedure

1. Check the device that sends the incorrect LSAs.

2. Contact contact technical support personnel.