BRASL2TP/4/BRAS_LNS_TUNNEL_LOG

Message

BRASL2TP/4/BRAS_LNS_TUNNEL_LOG: The number of L2TP tunnels configured on the LNS reached the maximum number allowed.

This log is supported only on NetEngine 8000 F1A.

In VS mode, this log is supported only by the admin VS.

Description

The number of L2TP tunnels on an LNS device reached the upper limit.

Parameters

None

Possible Causes

The number of L2TP tunnels on an LNS device reached the upper limit.

Procedure

1. Run the display l2tp tunnel lns command in any view to check whether the number of LNS-side L2TP tunnels reaches the upper limit.

  • If yes, go to Step 2.
  • If not, go to Step 3.

2. Collect log and configuration information, and contact technical support personnel.

3. End.

Parent Topic: BRASL2TP
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >