NAT/4/CGN_NO_PAT_FULL
Message
NAT/4/CGN_NO_PAT_FULL: The number of IP addresses allocated from the no-pat public network address pool reached the threshold. (AddrGroupName=[AddrGroupName], InstanceType=[InstanceType], InstanceName=[InstanceName], Pre-IPNum=[IPNum], Threshold=[Threshold], Slot=[Slot], Cpu =[Cpu])
In VS mode, this log is supported only by the admin VS.
Description
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
|
AddrGroupName |
Name of an IP address pool. |
|
InstanceType |
Instance type. |
|
InstanceName |
Instance name. |
|
IPNum |
Number of used IP addresses. |
|
Threshold |
Threshold. |
|
Slot |
Slot ID of a service board. |
|
Cpu |
CPU ID of a service board. |
Possible Causes
The proportion of used addresses in a specified no-PAT address pool to the total supported ones reached a specified threshold on a CGN device.
Procedure
Collect alarm information, log information and configuration information, and then contact technical support personnel.