NAT/6/CGN_NO_PAT_RESUME
Message
NAT/6/CGN_NO_PAT_RESUME: Addresses in the no-pat public address pool became available. (AddrGroupName=[AddrGroupName], InstanceType=[InstanceType], InstanceName= [InstanceName], Pre-IPNum=[IPNum], Slot=[Slot], Cpu =[Cpu])
This log is supported only on NetEngine 8000 F1A.
In VS mode, this log is supported only by the admin VS.
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
|
AddrGroupName |
Name of an IP address pool. |
|
InstanceType |
Instance type. |
|
InstanceName |
Instance name. |
|
IPNum |
Number of used IP addresses. |
|
Slot |
Slot ID of a service board. |
|
Cpu |
CPU ID of a service board. |
Possible Causes
The number of used addresses in the No-PAT address pools fell to 7/8 of the upper limit on a CGN device.
Procedure
This log message is informational only, and no action is required.