NAT/4/CGN_USERPORT_USEUP_NORMAL

Message

NAT/4/CGN_USERPORT_USEUP_NORMAL: The number of ports is normal. (Protocol=[Protocol], CPEIP=[CPEIP], Ports=[Ports], InstanceType=[InstanceType], InstanceName=[InstanceName], AddrGroupName=[AddrGroupName], AddrGroupID=[AddrGroupID], Threshold=[Threshold], Slot=[Slot], Cpu=[Cpu], UserID=[UserID])

This log is supported only on NetEngine 8000 F1A.

In VS mode, this log is supported only by the admin VS.

Description

The number of used user-based ports is restored to the normal range.

Parameters

Parameter Name	Parameter Meaning
Protocol	Protocol type. TCP: TCP protocol. UDP: UDP protocol. ICMP: ICMP protocol. TOTAL: all protocols.
CPEIP	CPE IP address.
Ports	Number of used ports.
InstanceType	Instance type.
InstanceName	Instance name.
AddrGroupName	Name of an address pool.
AddrGroupID	ID of an address pool.
Threshold	Threshold.
Slot	Slot ID of a service board.
Cpu	CPU ID of a service board.
UserID	User ID.

Possible Causes

The number of used user-based ports is restored to the normal range.

Procedure

This log message is informational only, and no action is required.