NAT/4/CGN_USER_PORT_FULL

Message

NAT/4/CGN_USER_PORT_FULL: The number of ports assigned to CPEs reaches the upper limit. (Protocol=[Protocol], CPEIP=[CPEIP], Ports=[Ports], InstanceType=[InstanceType], InstanceName=[InstanceName], AddrGroupName=[AddrGroupName], AddrGroupID=[AddrGroupID], Threshold=[Threshold], Slot=[Slot], Cpu=[Cpu], UserID=[UserID])

This log is supported only on NetEngine 8000 F1A.

In VS mode, this log is supported only by the admin VS.

Description

The proportion of interfaces assigned to a specified user to the total supported ones reached a specified threshold.

Parameters

Parameter Name	Parameter Meaning
Protocol	Protocol type. The value is TOTAL.
CPEIP	CPE IP address
Ports	Number of used ports.
InstanceType	Instance type.
InstanceName	Instance name.
AddrGroupName	Name of an IP address pool.
AddrGroupID	ID of an IP address pool.
Threshold	Threshold of the proportion of interfaces assigned to a specified user to the total supported ones.
Slot	Slot ID of a service board.
Cpu	CPU ID of a service board.
UserID	User ID.

Possible Causes

The proportion of interfaces assigned to a specified user to the total supported ones reached a specified threshold.

Procedure

Collect alarm information, log information and configuration information, and then contact technical support personnel.