BRASDHCP/6/DHCPS_IP_CONFLICT_ALARMID
Message
BRASDHCP/6/DHCPS_IP_CONFLICT_ALARMID: IP Address [ip-address] conflicted. (Mac=[mac-address], IfName=[if-name], VlanId=[vlan-id])
In VS mode, this log is supported only by the admin VS.
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
|
ip-address |
IP address. |
|
mac-address |
MAC address. |
|
if-name |
Interface name. |
|
vlan-id |
Specifies the ID of a VLAN. |
Procedure
1. Run the display domain name command to check whether an address pool is bound to the domain and whether the IP-address-pool-name field exists.
- If no address pool is bound to the domain, bind an address pool to the domain according to the configuration guide -BRAS service.
- If an address pool is bound to the domain, proceed to step 2.
2. Run the display ip pool name command to view the conflict field, proceed to step 3.
3. Run the section command in the view of the address pool or the ip-pool command in the domain view to add an IP address section and add IP addresses in the IP address section as required.
4. Check whether the alarm is cleared.
- If yes, proceed to step 6.
- If no, proceed to step 5.
5. Collect alarm information, log information and configuration information, and then contact technical support personnel.
6. End.