ETRUNK/4/ETRUNK_AUTHENTICATE_PEER_FAIL: Authenticating the peer E-Trunk failed. (ETrunkId=[ETrunkId], AuthenticationMode=[AuthenticationMode])
| Parameter Name | Parameter Meaning |
|---|---|
|
ETrunkId |
E-Trunk ID |
|
AuthenticationMode |
E-Trunk authentication mode |
1. Run the authentication-mode { hmac-sha1 | hmac-sha256 | enhanced-hmac-sha256 } command in the E-Trunk view to configure the authentication mode of one end to be the same as that of the other end. Then, Check whether the alarm is cleared. If the alarm persists, go to Step 2.
2. Run the security-key { simple simple-key | cipher { cipher-key1 | cipher-key2 | cipher-key3 } } command in the E-Trunk view to configure the key of one end to be the same as that of the other end. Check whether the alarm persists. If the alarm persists, go to Step 3.
3. Collect log information and configuration information, and then contact technical support personnel.