FTPS/5/FTPS_RENAME_CMD

Message

FTPS/5/FTPS_RENAME_CMD: The [command_name] command is executed on the client side. (FromFileName=[FromFileName], ToFileName=[ToFileName], UserName=[UserName], UserAddress=[UserAddress], LocalAddress=[LocalAddress], VPNInstanceName=[VPNInstanceName], ClientDataPort=[ClientDataPort], Result=[Result])

In VS mode, this log is supported only by the admin VS.

Description

Renaming succeeded or failed after the rename command was run on the FTP client.

Parameters

Parameter Name	Parameter Meaning
command_name	Indicates the command name.
FromFileName	Indicates the Original file name.
ToFileName	Indicates the New file name.
UserName	Indicates the User name of the client.
UserAddress	Indicates the IP address of the client.
LocalAddress	Indicates the IP address of the server.
VPNInstanceName	Indicates the name of the VPN instance.
ClientDataPort	Indicates the Data port of the client.
Result	Indicates the result of the renamed on FTP server.

Possible Causes

The rename command was run on the FTP client.

Procedure

· Check whether the new path name is valid.
· Check whether the new path has the permission.
· Check whether the source file exists.
· Check whether disconnection exists.