BRASUM/4/HMA_USERTABLE_FULL

Message

BRASUM/4/HMA_USERTABLE_FULL: The number of HMA user backup table reached the maximum number.

This log is supported only on NetEngine 8000 F1A.

In VS mode, this log is supported only by the admin VS.

Description

The number of HMA user backup table reached the maximum number.

Parameters

None

Possible Causes

The number of HMA user backup table reached the maximum number.

Procedure

1. Run the display access-user auto-save statistics command to check the maximum number of DHCP users whose information can be automatically backed up and check the number of DHCP users whose information has been backed up.

2. Compare the two numbers to determine whether the maximum number has been reached. If yes, go to Step 3. If no, go to Step 4.

3. Run the access-user dhcp auto-save max-user-number max-num command to increase the maximum number of DHCP users whose information can be automatically backed up.

4. Contact technical support engineers.