IFIT/2/IFIT_DYNFLOW_INGRESS_REACH_LIMIT_active

Message

IFIT/2/IFIT_DYNFLOW_INGRESS_REACH_LIMIT_active: The number of iFIT dynamic ingress flow reaches the upper limit. (UpperLimit=[UpperLimit])

In VS mode, this log is supported only by the admin VS.

Description

The total number of iFIT dynamic ingress flow reaches the upper limit.

Parameters

Parameter Name	Parameter Meaning
UpperLimit	Upper limit for the number of dynamic flow ingress on an iFIT device

Possible Causes

The iFIT total number of dynamic ingress flow reaches the upper limit.

Procedure

1.On the NMS,check whether the total number of iFIT dynamic ingress flow reaches the upper limit. Delete redundant dynamic ingress flow anc check whether the alarm is cleared.

2.If the alarm persists, contant Huawei technical support personnel.