PIM-STD/4/INVALID_JP

Message

PIM-STD/4/INVALID_JP: PIM receives an Invalid Join/Prune message. (GroupMappingOrigin=[GroupMappingOrigin], GroupMappingAddrType=[GroupMappingAddrType], GrpAddr=[GrpAddr], GrpPfxLen=[GrpPfxLen], GroupMappingRPAddrType=[GroupMappingRPAddrType], RPAddr=[RPAddr], GroupMappingPimMode=[GroupMappingPimMode], InvJPAddrType=[InvJPAddrType], InvJPOriginAddr=[InvJPOriginAddr], InvJPGrpAddr=[InvJPGrpAddr], InvJPRpAddr=[InvJPRpAddr], NbrIfIndex=[NbrIfIndex], NbrAddrType=[NbrAddrType], NbrAddr=[NbrAddr], NbrUpTime=[NbrUpTime])

Description

PIM·received·invalid·Join/Prune·messages.

Parameters

Parameter Name Parameter Meaning

GroupMappingOrigin

RP type

GroupMappingAddrType

Group address type

GrpAddr

Group address in the Join/Prune message

GrpPfxLen

Mask length of the multicast group address

GroupMappingRPAddrType

RP address type

RPAddr

RP address

GroupMappingPimMode

Current PIM mode

InvJPAddrType

Address type of the invalid Join/Prune messages

InvJPOriginAddr

Source address of the invalid Join/Prune messages

InvJPGrpAddr

Group address of the invalid Join/Prune messages

InvJPRpAddr

RP address of the invalid Join/Prune messages

NbrIfIndex

Index of the neighboring interface

NbrAddrType

Address type of the neighboring interface

NbrAddr

Address of the neighboring interface

NbrUpTime

Lifetime of the neighbor relationship

Possible Causes

Cause 1: The RP address carried in the received Join or Prune message was different from that specified on the device.

Cause 2: A Join or Prune message of (*.G) or (S, G, RPT) type was received but its group address was in the SSM range specified on the device.

Procedure

Cause·1:·The·RP·address·carried·in·the·received·Join·or·Prune·message·was·different·from·that·specified·on·the·device.

  • Run·the·display·pim·rp-info·command·to·check·whether·the·RP·configurations·of·the·device·that·sends·the·Join/Prune·message·are·the·same·as·those·of·the·local·device.
  • If·the·RP·configurations·of·the·device·that·sends·the·Join/Prune·message·are·the·same·as·those·of·the·local·device,·go·to·Step·2.
  • If·the·RP·configurations·of·the·device·that·sends·the·Join/Prune·message·are·different·from·those·of·the·local·device,·configure·a·same·RP·for·the·devices.
  • Collect·log·information·and·configuration·information,·and·then·contact·technical·support·personnel..

Cause·2:·A·Join·or·Prune·message·of·(*.G)·or·(S,·G,·RPT)·type·was·received·but·its·group·address·was·in·the·SSM·range·specified·on·the·device.

Run·the·display·current-configuration·command·to·check·whether·the·SSM·group·address·range·on·the·device·that·sends·the·Join/Prune·message·is·the·same·as·that·on·the·local·device.

  • If·the·SSM·group·address·range·on·the·device·that·sends·the·Join/Prune·message·is·the·same·as·that·on·the·local·device,·go·to·Step·2.
  • If·the·SSM·group·address·range·on·the·device·that·sends·the·Join/Prune·message·is·different·from·that·on·the·local·device,·configure·a·same·SSM·group·address·range·for·the·devices..
  • Collect·log·information·and·configuration·information,·and·then·contact·technical·support·personnel..
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >