BRASAAA/4/IPV6_LOWER

Message

BRASAAA/4/IPV6_LOWER: The IPv6 address usage fell to the lower limit of the domain. (Domain name=[name-para],MinThreshold=[threshold-para])

This log is supported only on NetEngine 8000 F1A.

In VS mode, this log is supported only by the admin VS.

Description

The IPv6 address usage fell to the lower limit of a domain.

Parameters

Parameter Name Parameter Meaning

name-para

Name of the domain

threshold-para

Lower limit

Possible Causes

Cause 1: A large number of users logged out.

Cause 2: The configured lower limit was too high.

Procedure

1. Run the display this command in the system view to check whether IPv6-warning-threshold(Low) is appropriate.

  • If IPv6-warning-threshold(Low) is too high, go to Step 2.
  • If IPv6-warning-threshold(Low) is appropriate, go to Step 3.

2. Run the ipv6-warning-threshold lower-limit command in the AAA domain view to reconfigure the lower limit.

3. Run the display domain domain-name command in the system view to check the current IPv6 address usage.

  • If the IPv6 address usage falls to or approaches the lower limit, run the display aaa offline-record brief command to check whether the logout reason is User request to offline.
  • If the logout reason is User request to offline, no action is required.
  • If the logout reason is not User request to offline, contact technical support personnel.
  • If the IPv6 address usage is appropriate, contact technical support personnel.
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >