ISIS/3/ISIS_DATABASE_OVERLOAD

Message

ISIS/3/ISIS_DATABASE_OVERLOAD: The overload state of IS-IS LSDB changed. (isisSysInstance=[isisSysInstance], isisSysLevelIndex=[isisSysLevelIndex], isisSysLevelOverloadState=[isisSysLevelOverloadState])

Description

The database entered or exited from the Overload state.

Parameters

Parameter Name	Parameter Meaning
isisSysInstance	ID of an IS-IS process
isisSysLevelIndex	IS-IS level
isisSysLevelOverloadState	Overload state

Possible Causes

Cause 1: The set-overload or undo set-overload command was run in the IS-IS view.

Cause 2: The IS-IS process entered the Overload state and then exited from it.

Cause 3: Failed to apply for memory in the case of memory shortage, causing a system crash.

Procedure

1. Run the display this command in the IS-IS view to check whether the set-overload or undo set-overload command has been configured in the process.

If so, go to Step 4. This log message is informational only, and no action is required.
If not, go to Step 2.

2. Run the display memory-usage command to check whether the memory usage of the device has reached the threshold.

If so, obtain user logs and go to Step 3.
If not, go to Step 3.

3. Collect log information and configuration information, and then contact technical support personnel.

4. End.