LDP/4/LDP_GR_TIMER_START

Message

LDP/4/LDP_GR_TIMER_START: LDP GR timer start. (PID=[hPid], CID=[hCid], VrfName=[VrfName], ReconnectTimer=[ReconnectTimer], PeerID=[PeerID], GRTimerType=[GRTimerType])

Description

Displays the type and parameters related to the timer that starts GR.

Parameters

Parameter Name	Parameter Meaning
hPid	local PID.
hCid	local CID.
VrfName	VRF name.
ReconnectTimer	Timeout period of the timer.
PeerID	Peer ID
GRTimerType	GR timer type.

Possible Causes

Cause 1: The Reconnect timer starts.

After a master/slave board switchover is performed on the GR Restarter, the GR Helper detects the failure to establish an LDP session with the GR Restarter.

In this case, the GR Helper starts the Reconnect timer.

Cause 2: The Recovery timer starts.

After an LDP session is reestablished, the GR Helper starts the Recovery timer.

Procedure

1.To wait for the reestablishment of the LDP session.

2.To wait for the LSP to recover.

3.Collect the alarm, log, and configuration information, and contact technical support personnel.

4.End.