MFLP/5/MFLP_LINKBLOCK_LOG: The AC interfaces of the main interface have been blocked due to MAC-Flapping association. (VsiName=[vsiname], ACInterfaceName=[ACName], MainInterfaceName=[MainIfName], BlockTime=[blockTime])
Parameter Name | Parameter Meaning |
---|---|
vsiname |
Name of the associated VSI |
ACName |
Name of the AC interface that triggers associated blocking |
MainIfName |
Name of the main interface that is blocked |
blockTime |
Blocking time |
The main interface is configured with MAC flapping association, and the AC interface in the main interface has a loop.
1. Run the display current-configuration command to check whether the loopback local command is configured on AC-side interfaces corresponding to the VSI.
2. Run the display loop-detect eth-loop command to check whether Action is displayed as Alarm-only.
3. For the VSI in the alarm, perform either of the following steps:
4. Collect log information and configuration information, and then contact technical support personnel.