OSPF/4/NBR_RES_HELPER_STAT_CHG

Message

OSPF/4/NBR_RES_HELPER_STAT_CHG: The neighbor exits from the restart helper state. (RouterId=[RouterId], NbrIpAddr=[NbrIpAddr], NbrAddressLessIndex=[NbrAddressLessIndex], NbrRtrId=[NbrRtrId], NbrRestartHelperStatus=[NbrRestartHelperStatus], NbrRestartHelperAge=[NbrRestartHelperAge], NbrRestartHelperExitReason=[NbrRestartHelperExitReason], AreaId=[AreaId])

Description

The GR helper status of the OSPF neighbor changed.

Parameters

Parameter Name	Parameter Meaning
RouterId	ID of the local device
NbrIpAddr	IP address of the non-virtual interface
NbrAddressLessIndex	Interface index
NbrRtrId	Router ID of a neighbor.
NbrRestartHelperStatus	New helper status
NbrRestartHelperAge	Remaining time for completing GR
NbrRestartHelperExitReason	Reason of exiting from the helper status
AreaId	Area ID.

Possible Causes

During GR, the GR helper status of the router changed.

Procedure

1. Perform the following operations as required.

If the alarm was caused by manual master/slave switchover or the OSPF process restart by using GR, go to Step 3.
If the alarm was generated without any manual operation, go to Step 2.

2. Contact contact technical support personnel.

3. End.