CONFIGURATION/6/NETCONF_CONFIG_CHANGE_EVENT

Message

CONFIGURATION/6/NETCONF_CONFIG_CHANGE_EVENT: The configuration changed. (Internal change =[isInner], User name =[username], Session ID =[ssnId], Command source address =[srcAddress], Storage type =[datastoreType], Terminal type =[termninalType])

In VS mode, this log is supported only by the admin VS.

Description

The configuration changed.

Parameters

Parameter Name	Parameter Meaning
isInner	Whether the change is an internal change. 0: non-internal change, indicating that the change is caused by user operations. 1: internal change, which is not caused by user operations.
username	User name for initiating a configuration change.
ssnId	Session ID for initiating a configuration change.
srcAddress	Source address for initiating a configuration change.
datastoreType	Storage DB type for initiating a configuration change: 1: RDB change. 2: CDB change. 3: Startup configuration file change.
termninalType	Terminal type for initiating a configuration change: 0: CLI 1: SNMP 2: NETCONF 7: MML 65535: internal change, such as board loading on a device

Possible Causes

The running configuration or configuration file used for the next startup was changed by a user or in the system.

Procedure

This log message is informational only, and no action is required.