BGP/6/NOTIFY_SEND: Sent a NOTIFICATION to the peer. (Peer=[peer-address], SourceInterface=[SourceInterface], ErrorCode=[error-code], SubErrorCode=[sub-error-code],NotifyInfo=[notify-info], VpnInstance=[VpnInstance], ErrorData=[error-data])
| Parameter Name | Parameter Meaning |
|---|---|
|
peer-address |
IP address of a peer |
|
SourceInterface |
Source interface |
|
error-code |
Error code carried in a Notification message. For details about error codes, see the BGP packet format in BGP fundamentals. |
|
sub-error-code |
Error subcode carried in a NOTIFICATION message |
|
notify-info |
Notification packet information |
|
VpnInstance |
Name of a VPN instance |
|
error-data |
Summary of error data contained in a NOTIFICATION message |
Cause 1: When detecting an incorrect state, a BGP device sent a NOTIFICATION message containing an error code, an error subcode, and error contents to its peer.
Cause 2: The reset bgp command was run to reset the BGP connection.
1. Collect information based on the error code and error subcode.
2. Collect log information and configuration information, and then contact technical support personnel.
1. Wait for the reestablishment of the BGP connection. If the connection is not reestablished, go to Step 2.
2. Collect log information and configuration information, and then contact technical support personnel.