NQA/4/NQA_JITTER_OWD_THRESHOLD_SD

Message

NQA/4/NQA_JITTER_OWD_THRESHOLD_SD: The OWD-SD of the NQA entry exceeded the configured threshold. (OwnerIndex=[OwnerIndex], TestName=[TestName], TargetAddressType=[TargetAddressType], TargetAddress=[TargetAddress], Threshold=[Threshold], Index=[Index], RttMax=[RttMax], MaxDelaySD=[MaxDelaySD], MaxDelayDS=[MaxDelayDS], OWDOverThresholdsSD=[OWDOverThresholdsSD])

Description

Indicates that the period of a test exceeded the set threshold. The threshold could be set by the user. The threshold owd-sd command could modify the threshold.

Parameters

Parameter Name Parameter Meaning

OwnerIndex

Indicates the administrator of an NQA test instance.

TestName

Indicates the name of an NQA test instance.

TargetAddressType

Indicates the destination address type of an NQA test instance.

TargetAddress

Indicates the destination address of an NQA test instance.

Threshold

Indicates the user-defined threshold of an NQA test instance.

Index

Indicates the index of the result table.

RttMax

Indicates the maximum RTT value of an NQA test instance.

MaxDelaySD

Indicates the maximum OWD from the source to the destination.

MaxDelayDS

Indicates the maximum OWD from the destination to the source.

OWDOverThresholdsSD

Indicates the number of times that the OWD from the source to the destination exceeds the threshold.

Possible Causes

Cause 1: The threshold was set too small.

Cause 2: The network was busy.

Procedure

Parent Topic: NQA
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >