NQA/4/NQA_JITTER_TEST_COMPLETED: NQA entry test completed. (OwnerIndex=[OwnerIndex], TestName=[TestName], TargetAddressType=[TargetAddressType], TargetAddress=[TargetAddress], OperStatus=[OperStatus], Index=[Index], RttSum=[RttSum], RTTSum2Low=[RTTSum2Low], RTTSum2High=[RTTSum2High], RTTMin=[RTTMin], RTTMax=[RTTMax], PacketOutOfSequences=[PacketOutOfSequences], Errors=[Errors], Busies=[Busies], Timeouts=[Timeouts], Drops=[Drops], ProbeResponses=[ProbeResponses], SentProbes=[SentProbes], MaxDelaySD=[MaxDelaySD], MaxDelayDS=[MaxDelayDS], JitterOut=[JitterOut], JitterIn=[JitterIn], OWSumSD=[OWSumSD], OWSumDS=[OWSumDS])
| Parameter Name | Parameter Meaning |
|---|---|
|
OwnerIndex |
Indicates the administrator of an NQA test instance. |
|
TestName |
Indicates the name of an NQA test instance. |
|
TargetAddressType |
Indicates the type of the destination address. |
|
TargetAddress |
Indicates the destination address. |
|
OperStatus |
Indicates the status of an NQA test instance. |
|
Index |
Indicates the index of the result table. |
|
RttSum |
Indicates the RTT sum. |
|
RTTSum2Low |
Indicates the lower 32 bits of the RTT square sum. |
|
RTTSum2High |
Indicates the higher 32 bits of the RTT square sum. |
|
RTTMin |
Indicates the minimum RTT. |
|
RTTMax |
Indicates the maximum RTT. |
|
PacketOutOfSequences |
Indicates the number of packets with incorrect sequence numbers. |
|
Errors |
Indicates the number of packets with incorrect sequence numbers. |
|
Busies |
Indicates the number of initialization or resource application failures. |
|
Timeouts |
Indicates the number of times that no response is received within the timeout period. |
|
Drops |
Indicates the number of packets failed to be sent. |
|
ProbeResponses |
Indicates the number of received packets. |
|
SentProbes |
This object indicates the number of sent packets. |
|
MaxDelaySD |
Indicates the OWD from the source to the destination. |
|
MaxDelayDS |
Indicates the OWD from the destination to the source. |
|
JitterOut |
Indicates the jitter in sending packets. |
|
JitterIn |
Indicates the jitter in receiving packets. |
|
OWSumSD |
Indicates the sum of OWD from the source to the destination. |
|
OWSumDS |
Indicates the sum of OWD from the destination to the source. |
This trap message is informational only, and no action is required.