NTP/4/NTP_LEAP_CHANGE

Message

NTP/4/NTP_LEAP_CHANGE: System leap changes from [leap1] to [leap2] after clock update.

In VS mode, this log is supported only by the admin VS.

Description

The leap second of the system changed after the system clock is updated.

Parameters

Parameter Name Parameter Meaning

leap1

Indicates the leap second of the system before clock update.

leap2

Indicates the leap second of the system after clock update.

Possible Causes

Cause 1: The system has just selected the source reference clock.

Cause 2: The switchover of source reference clocks is performed during clock synchronization.

Procedure

  • This log message indicates a normal situation, and no action is required.
Parent Topic: NTP
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >