LACP/3/OPTICAL_FIBER_MISCONNECT

Message

LACP/3/OPTICAL_FIBER_MISCONNECT: The member of the LACP mode Eth-Trunk interface received an abnormal LACPDU, which may be caused by optical fiber misconnection or changed packet. (TrunkName=Eth-trunk[TrunkId], PortName=[PortName], LocalSysPri=[LocalSysPri], PDUSysPri=[PDUSysPri], LocalSysId=[LocalSysId], PDUSysId=[PDUSysId], LocalPortKey=[LocalPortKey], PDUPortKey=[PDUPortKey], LocalPortPri=[LocalPortPri], PDUPortPri=[PDUPortPri], LocalPortNumber=[LocalPortNumber], PDUPortNumber=[PDUPortNumber], LocalPortState=[LocalPortState], PDUPortState=[PDUPortState])

Description

The parameters carried in an LACPDU received by the member interface of an Eth-Trunk interface in static LACP mode differed from those saved on the member interface.

Parameters

Parameter Name	Parameter Meaning
TrunkId	Name of an Eth-Trunk interface in static LACP mode
PortName	Name of the member interface of the Eth-Trunk interface in static LACP mode
LocalSysPri	Local system priority
PDUSysPri	Local system priority in the received LACPDU
LocalSysId	Local system MAC address
PDUSysId	Local system MAC address in the received LACPDU
LocalPortKey	Local interface key value
PDUPortKey	Local interface key value in the received LACPDU
LocalPortPri	Local interface priority
PDUPortPri	Local interface priority in the received LACPDU
LocalPortNumber	Local port number
PDUPortNumber	Local port number in the received LACPDU
LocalPortState	Local interface status
PDUPortState	Local interface status in the received LACPDU

Possible Causes

The optical fiber was incorrectly connected or the LACPDU was changed.

Procedure

1. Check whether the interface information in the log is the same as that in the LACPDU.

If they are the same, go to Step 3.
If they are different, go to Step 2.

2. Connect the optical fiber correctly between Eth-Trunk member interfaces.

3. Collect log information and configuration information, and then contact technical support personnel.