OSPF/6/OSPFV2_LSDB_OVERFLOW

Message

OSPF/6/OSPFV2_LSDB_OVERFLOW: The number of AS-external LSAs in the LSDB of an OSPF process reaches the configured maximum number.(ospfRouterId=[ospfRouterId], ospfExtLsdbLimit=[ospfExtLsdbLimit])

Description

The number of external routes in the OSPF LSDB exceeded the maximum number allowed.

Parameters

Parameter Name	Parameter Meaning
ospfRouterId	hwOspfv2ProcessIdIndex: ID of an OSPF process Router ID
ospfExtLsdbLimit	Maximum number of external routes supported by the OSPF LSDB

Parameter Name

Parameter Meaning

ospfRouterId

hwOspfv2ProcessIdIndex: ID of an OSPF process

Router ID

ospfExtLsdbLimit

Maximum number of external routes supported by the OSPF LSDB

Possible Causes

The number of external routes in the OSPF LSDB exceeded the maximum number allowed.

Procedure

1. Run the display ospf brief command. If OSPF is in LSDB overflow status is displayed in the command output, the OSPF LSDB in the current OSPF process is overloaded.

If the OSPF LSDB is overloaded, go to Step 2.
If the OSPF LSDB is not overloaded, this log message is informational only and no action is required.

2. Perform the following operations as required:

If a change in the maximum number is allowed, run the lsdb-overflow-limit number command to increase it.
If a change in the maximum number is not allowed, go to Step 3.

3. Contact technical support personnel.

4. End.