OSPFV3/2/OSPFV3_ROUTE_BE_DEL_BY_PURGE_active: OSPFv3 routes advertised by the local device were deleted by another device. Log in to the possibly faulty device. If the device is deleting routes, reset or isolate it from the network. Otherwise, check other devices. (SysProcessId=[hwOspfv3ProcessId], HostName=[hwOspfv3PurgeHostName], HostIpAddress=[hwOspfv3PurgeIpAddress], RouterID=[hwOspfv3PurgeRouterId], Area=[hwOspfv3AreaIdIndex], TotalNodeNum=[hwOspfv3TotalNodeNum], Log in to the following devices to locate the faulty device: (1) HostName=[hwOspfv3PurgeHostName1], HostIpAddress=[hwOspfv3PurgeIpAddress1], RouterID=[hwOspfv3PurgeRouterId1] (2) HostName=[hwOspfv3PurgeHostName2], HostIpAddress=[hwOspfv3PurgeIpAddress2], RouterID=[hwOspfv3PurgeRouterId2] (3) HostName=[hwOspfv3PurgeHostName3], HostIpAddress=[hwOspfv3PurgeIpAddress3], RouterID=[hwOspfv3PurgeRouterId3])
The OSPFv3 LSAs advertised by the local device were flushed by another device. In this case, log in to a possibly faulty node and check whether it is flushing LSAs. If it is flushing LSAs, reset or isolate it. If the possibly faulty node is not flushing LSAs, check other possibly faulty nodes.
| Parameter Name | Parameter Meaning |
|---|---|
|
hwOspfv3ProcessId |
Process ID on the faulty node |
|
hwOspfv3PurgeHostName |
Hostname of the faulty node |
|
hwOspfv3PurgeIpAddress |
Host IP address of the faulty node |
|
hwOspfv3PurgeRouterId |
Router ID in the process |
|
hwOspfv3AreaIdIndex |
OSPFv3 area ID |
|
hwOspfv3TotalNodeNum |
Total number of nodes on the network |
|
hwOspfv3PurgeHostName1 |
Hostname of the possibly faulty node. |
|
hwOspfv3PurgeIpAddress1 |
Host IP address of the possibly faulty node. |
|
hwOspfv3PurgeRouterId1 |
Router ID of the possibly faulty node. |
|
hwOspfv3PurgeHostName2 |
Hostname of the possibly faulty node. |
|
hwOspfv3PurgeIpAddress2 |
Host IP address of the possibly faulty node. |
|
hwOspfv3PurgeRouterId2 |
Router ID of the possibly faulty node. |
|
hwOspfv3PurgeHostName3 |
Hostname of the possibly faulty node. |
|
hwOspfv3PurgeIpAddress3 |
Host IP address of the possibly faulty node. |
|
hwOspfv3PurgeRouterId3 |
Router ID of the possibly faulty node. |
1. Reset or isolate the faulty node from the network.