OSPF/3/OSPF_IF_RX_BAD_PACKET

Message

OSPF/3/OSPF_IF_RX_BAD_PACKET: An OSPF packet that is received on a non-virtual interface cannot be parsed. (RouterId=[RouterId], IfIpAddress=[IfIpAddress], AddressLessIf=[AddressLessIf], PacketSrc=[PacketSrc], PacketType=[PacketType], AreaId=[AreaId])

Description

An OSPF packet that cannot be parsed was received from a non-virtual interface on the peer end. The possible cause is that the local end was attacked, or the local device was not connected with a non-Huawei device successfully.

Parameters

Parameter Name	Parameter Meaning
RouterId	ID of the local router
IfIpAddress	IP address of the non-virtual interface
AddressLessIf	Interface index
PacketSrc	Source IP address of the packet
PacketType	Packet type ID
AreaId	Area ID.

Possible Causes

An incorrect packet was generated on the peer non-virtual interface.

Procedure

1. Run the display ospf error [ packet ] command in the diagnose view to check and save the content of the incorrect packet. The alarm information in the packet content indicates that the packet cannot be parsed.

2. Contact contact technical support personnel.

3. End.