OSPF/6/OSPF_SMOOTH

Message

OSPF/6/OSPF_SMOOTH: OSPF-INFO:Smooth event happen between components. (LocalComp=[LocalComp], PeerComp=[PeerComp], ProducerName=[ProducerName], SmoothLevel=[SmoothLevel], ProcessId=[ProcessId], AreaTableId=[AreaTableId], SmoothEvent=[SmoothEvent])

Description

A smoothing event occurred between two components.

Parameters

Parameter Name	Parameter Meaning
LocalComp	Name of the local component.
PeerComp	Name of the peer component.
ProducerName	Name of the verification producer.
SmoothLevel	Smoothing level.
ProcessId	OSPF process ID.
AreaTableId	OSPF area ID or routing table ID.
SmoothEvent	Type of a smoothing event: SMOOTH_REQUEST: indicates a smoothing request event. SMOOTH_DELAY: indicates a smoothing delay event. SMOOTH_BEGIN: indicates a smoothing start event. SMOOTH_END: indicates a smoothing end event.

Possible Causes

Cause 1: Perform the master/slave switchover.

Cause 2: Run the reset ospf process command to reset an OSPF process.

Cause 3: Sequence numbers mismatched or data was incorrect.

Cause 4: Data was incorrect.

Procedure

This log message is informational only, and no action is required.