DRIVER/6/PHY_PORTMODE_CHANGE

Message

DRIVER/6/PHY_PORTMODE_CHANGE: The work mode of interface [STRING1] changed from [STRING2] to [STRING3].

Description

The working mode of the port was changed.

Parameters

Parameter Name	Parameter Meaning
STRING1	Interface name.
STRING2	Original working mode of the port.
STRING3	Current working mode of the port.

Possible Causes

1. A GE optical module was installed on a physical interface.

2. The GE optical module on the physical interface was removed.

3. After the speed, duplex, negotiation, and port-type commands were run and the device was restarted, if a module switchover was triggered, a switchover log was generated.

Procedure

This log message is informational only, and no action is required.