QOS/4/POLICYFAIL_NO_CHASSISID: The ACL rule in the policy is not completely delivered.(SlotId=[SlotId],Reason=[Reason])
| Parameter Name | Parameter Meaning |
|---|---|
|
SlotId |
Specifies a slot ID. |
|
Reason |
Indicates the reason triggering the alarm. 1. The number of IPv4&L2&MPLS ACL rules exceeds the maximum number allowed on the device. 2. The number of IPv6 ACL rules exceeds the maximum number allowed on the device. 3. The number of IPv4&L2&MPLS&IPv6 ACL rules exceeds the maximum number allowed on the device. |
The interface board had insufficient resources, causing some ACL rules in the traffic policy not to be delivered.
1. Run the display this command in the interface view to view the traffic policies applied to the interface, and then run the undo traffic-policy { inbound | outbound } command to delete unwanted traffic policies.
2. Run the display this command in the traffic classifier views of remaining traffic policies to check configurations of ACL rules. Run the undo acl acl-number command then to delete unwanted ACL rules. Alternatively, run the undo rule rule-id command in the ACL view to delete unwanted ACL rules.
3. Run the display traffic policy statistics interface interface-type interface-number { inbound | outbound } command to view whether the Current status field is displayed as "OK!". The display of "OK!" indicates that all ACL rules in traffic policies are delivered.
4. Collect the alarm information, log information, and configuration information, and then contact technical support personnel.
5. End.